Eliminating BOD & TSS with MBBR & MBR Treatment Systems

Centralized Recycling Company

Tradebe' installed bioFAS™ MBBR and bioFLOW MBR systems achieve over 90% COD reduction and BOD elimination, meeting local POTW requirements.

Contact

project

bioFAS™ MBBR Treatment System & bioFLOW MBR System

industry

Centralized Wastewater Treatment

application

Chemical Oxygen Demand (COD) Removal | Biochemical Oxygen Demand (BOD) Removal | Total Suspended Solids (TSS) Removal

Tradebe - MBBR and MBR. This picture shows both an MBBR and MBR

Application Parameters

bioprocessH2O is equipped with a team of experts experienced in the wastewater industry. We provide solutions by offering innovative wastewater treatment systems that are custom built to each client’s needs and specifications. Allow bioprocessH2O to help you get the most out of your water with these recommended treatment systems.

Parameter

Influent

Effluent

Wastewater Flow

45,000 GPD

BOD

15,000 mg/L

<250 mg/L

COD

25,000 mg/L

<2,000 mg/L

TSS

2,000 mg/L

Turbidity

2,000 mg/L

<0.2 NTU

Schematics for a wastewater treatment system.

The Problem

This was centralized wastewater treatment and recovery facility needed to upgrade their equipment. The wastewater is highly loaded with BOD and COD and the local POTW demanded significant reductions in organic loading for discharge to the municipal sewer.

The Solution

bioprocessH2O supplied a bioFAS™ MBBR biological treatment process using three (3) 50,000-gallon bioreactors for BOD and COD removal. Wastewater then flows to a bioprocessH2O supplied bioFLOW Membrane (MBR) System for MBBR effluent polishing, biosolids concentration and TSS removal.

The Results

The bioFAS™ MBBR System and bioFLOW MBR System effectively removes more than 90% of the COD and virtually eliminates BOD with minimal operator attention to meet local POTW effluent discharge requirements.

45,000

GPD

>98%

BOD removed

>92 %

COD removed